Oval and Flat – Single and Double Sided Labeling
If you have requirements of 1000 pcs a week or more, the LabelOn™ Bechtop Flat and Oval 1 or 2 labels machine will pay for itself extremely quickly. It will also make your shelf presence look like you were using accurate packaging equipment 4 or 5 times more expensive than this unit.
We can even configure this machine (at point of manufacture) so that it achieves an astonishing feat – a single full wrap of an oval product!!
Flat and Near Flat Label Applicator
Labeling Machine Specifications:
Series: LabelOn™ Benchtop
Model: Flat and Oval One or Two Sides
Labelling accuracy: ±1.0mm
Typical Labelling speed: 8 to 15 Pieces / min
Product Height: 25mm to 250mm
Product Width: 25mm to 150mm
Product Thickness: 5mm to 125mm
Label Length: 12.5mm to 250mm
Label Height: 12.5mm to 150mm
Label Roll Core: ID Φ76 mm
Label Roll Diameter: OD Φ280mm
Machine Dimensions (L × W × H) 850mm×410mm×720mm
Power supply: 110/220V 50/60HZ
Total Power: 145W
Air Pressure (Mpa): 0.4 to 0.6Mpa
Model: Flat and Oval One or Two Sides
Labelling accuracy: ±1.0mm
Typical Labelling speed: 8 to 15 Pieces / min
Product Height: 25mm to 250mm
Product Width: 25mm to 150mm
Product Thickness: 5mm to 125mm
Label Length: 12.5mm to 250mm
Label Height: 12.5mm to 150mm
Label Roll Core: ID Φ76 mm
Label Roll Diameter: OD Φ280mm
Machine Dimensions (L × W × H) 850mm×410mm×720mm
Power supply: 110/220V 50/60HZ
Total Power: 145W
Air Pressure (Mpa): 0.4 to 0.6Mpa
Oval and Flat Single and Double Sided
Full Wrap Oval